Operation - Blumfeldt 10031445 Anschluss- Und Anwendungshinweise

Connect the power cable to a 13 amp supply
which is located in a safe, dry area.
The switch on the heater is used to control
the Heater.
• „I": the heater will be in standby mode.
The standby light turn orange.
• „0": Turn off the heater.
The panel control:
• When the
ing.
• Touch again to unlock,and its light will
become often bright.
• And touch the
at 750 W.
• Touch again. The heater will operate
at 1500 W.
• When the heater is working, touch
the heater will turn off after 2 hours.
• When the heater is working, and without
timer( light is not working), the heater
will turn off after 12 hours.
Although the patio heater is water-
proof, do not use when raining or in
wet conditions.
Never connect the power cable from
the electrical supply, when the patio
heater is not in use.
19

Operation

flashes, the heater is lock-
the heater will operate
power switch
,
control panel
remote control