Listening To Radio - auna 10032295 Anleitung

EN
24

LISTENING TO RADIO

Digital Audio Broadcasting (DAB) radio
1. Turn on the unit by pressing the On/Standby button (2)
2. When first turn on the unit, it is preset in DAB radio and the unit will
full scan the DAB radio stations. The display will show "Searching".
Alternatively, press Function button (8) to select " DAB " mode and then
press Scan button (9) for auto scan.
3. After the auto-scan has been completed, the unit will jump to the first
station receipt. Then press the Skip up
select your desired DAB channel
4. Press the Stop button (11) continuously to check the below info released
by DAB: Date/time > program type > scrolling text > group name >
frequency > transfer rate > signal strength.
5. Press the Volume knob (3) to the desired volume level.
6. If the unit is not in DAB radio when turning on, press the Function
button (8) to turn to the "DAB" mode. And press the Scan button (9) if
you wish to full scan again the DAB radio stations available
FM Radio
Auto tuning
1. Switch on the unit by pressing the On/Standby button (2), then press
Function button (8) to select " FM " mode.
2. Press the Scan button (9) once, unit will start to scan at tuning up direct
until radio station received. Press and hold the Scan button (9) for a
second, the unit will scan to tuning down direction. If the radio data
system (RDS) broadcasting signal received, the unit will set the actual
time automatically.
3. Press the Volume knob (3) to the desired volume level.
/down button (10) to