Product Components; Product Features - Peg Perego Viaggio 2-3 Flex Gebrauchsanleitung

the direction of travel or are
transversal to the direction of
travel.
• It is always advisable to fit the car
seat on the rear vehicle seat and
on the passenger's side.
• If the car seat is installed on
the front seat, it is advisable to
place it as far as possible from the
dashboard.
• If the vehicle's headrest makes
installing Viaggio 2-3 Flex difficult,
you can remove the vehicle's
headrest; if this is not removable
and interferes with the car seat's
headrest, please contact the After
Sales Service.

Product components

2. Inspect the content of the package
and contact the post sale Customer
Care if some items are missing.
_The car seat includes:
1 headrest (a), 1 backrest (b), 1 seat
(c), 1 Surefix Base integrated into the
seat (d).
The car seat is ready to use: no
assembly operation is required.
Opening the product
before use
3. Raise the car seat backrest until
it clicks; the product should remain
upright on its own. The backrest
oscillates by a few degree to better
adapt to various types of vehicle seat.

Product features

Viaggio 2-3 Flex adjusts to grow
with your child. Each adjustment is
independent, to ensure maximum
flexibility of use.
4• The headrest can be adjusted in
3 positions. Lift the handle (fig_a)
on the back of the headrest and
simultaneously raise the headrest
(fig_b), placing it at the desired
height.
IMPORTANT: as the child grows,
it is necessary to adjust the height
of the headrest according to that
of the child.
IMPORTANT: after completing
the operation, try moving the
headrest to ensure it is correctly
fitted in place.
5• The width of the backrest may be
adjusted using the central knob (1) to
widen or tighten the side restraining
wings (2). Turn the knob clockwise
to widen the wings. This operation is
required as your child grows.
6• The height of the backrest may
be adjusted: push the handle on
the rear of the backrest upwards
(1) and at the same time lift the
entire backrest (2) to the desired
position. To lower the backrest, pull
the handle (1) and at the same time
push the backrest downwards (2).
This operation is required as your
child grows.
7• Viaggio2-3 Flex is fitted with a
reclining system that guarantees
maximum comfort. To recline the seat,
pull the handle (fig_a) on the front
and simultaneously recline the product
17