Abus TVIP21560 Bedienungsanleitung Seite 106

Security Mode
Here you can select the encryption type for your network.
Encryption Type:
Here you can select the encryption type for the network.
Key 1
Enter the network key (password) for access to the network here.
WPS
The WPS function allows simple set-up of a wireless connection of the camera to a
Wi-Fi network.
Enable WPS
Enable this function to use a WPS connection.
Please check whether your router supports the WPS function.
PIN Code
The PIN code is required for creating the connection. By default, this is set to 12345678. Click on
"Generate" to generate a new code.
PBC Connection
If your router has a WPS button, enable this function.
1. First, press the WPS button on the router.
2. Then click on "Connect" within two minutes.
3. The WLAN connection between the camera and router is established after a
short time.
PIN code of the router
Here, you can establish a WPS connection manually by entering the SSID and the router PIN code.
SSID:
Router PIN Code:
Apply the settings by clicking "Save".
Enter the SSID for the desired network.
Enter the router PIN code. Refer to the user guide from your router's
manufacturer to read out the WPS PIN code.
106
English