This situation can occur if:
- the XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
- the controller is switched off or defective
- the cable or connector is defective or the signal wires are swap in the input connector.
The individual channels and their features are listed under DMX-protocol.
Functions in DMX mode
Control-channel 1 – Focus
Value
000 - 255 Focus movement (8bit) from narrow to wide
Control-channel 2 – Strobe
Value
000 - 031 LED off
032 - 095 Linear strobe effect with increasing speed
096 - 159 Pulse strobe effect with increasing speed
160 - 223 Random strobe effect with increasing speed
224 - 255 LED on
Control-channel 3 - Dimmer
Value
000 - 255 Intensity 0 to 100%
Characteristic
Characteristic
Characteristic
28/32
00092680.DOC, Version 1.2