Klarstein 10030663 Anschluss- Und Anwendungshinweise Seite 32

Change a new CO cartridge
2
Please change the CO
and has beer in keg.
1. When turn the CO
2. Open the top cover, loose the cartridge sheath, and take out the empty CO
Insert a new 16g CO
which indicates that the cartridge seal has been pierced and the CO2 gas can flow into the keg freely.
Make us the bottle sheath is fixed tightly to avoid the CO2 leakage. Then put CO2 bottle sheath into the
top cover.
3. Close the top cover of beer cooler;
4. Turn the CO pressure knob to "+" position to turn on the CO
2
Reminder: each 16g CO
Warning:
• Please use the qualified CO
• The below CO cartridge information for your reference. Never use Nitrogen gas cartridge in the beer cool-
2
er to avoid the explosion, because of its much higher pressure;
• New CO cartridge need good reserve, any play if forbidden, or will cause hazards.
2
NW
Volume
GW
Cartridge weight
A
cartridge if you cannot pour beer out when the CO
2
pressure knob to "-" position, to close the CO
2
cartridge in the sheath, and screw the sheath tightly until you will hear a "Click",
2
cartridge can pressure more than 5L beer out.
2
cartridge.
2
15,5-16,5 g
20 ml
57-58,6 g
42-42,6 g
8.6-8.9 mm
pressure knob is at "on" position
2
supplying.
2
supply, and it is ready to pour beer out.
2
B
C
D
Pressure
Blast pressure
cartridge.
2
88-89 mm
21.7-22 mm
19-11 mm
60 kgf/cm
2
45 bar
32