Shoulder Strap - Shindaiwa AH243S Bedienungsanleitung

Before you start
Throttle lever free play
1. Cable adjuster
2. Locknut

Shoulder strap

The throttle lever free play should be approximately 4-6 mm.
Make sure that the throttle lever operates smoothly without bind-
ing. If it becomes necessary to adjust the lever free play, follow
the procedures and illustrations that follow.
1. Loosen the unscrew fasteners and remove the air cleaner
cover.
2. Loosen the locknut on the cable adjuster. Turn the cable ad-
juster in or out as required to obtain proper free play 4-6 mm.
3. Tighten the locknut.
4. Reinstall the air cleaner cover.
1. Hook the strap hook to the hanger on the outer tube.
2. Wear the shoulder strap so that the hook stays at your right
hand side.
3. Adjust the length of the shoulder strap so that you can hold
and operate the machine comfortably.
IMPORTANT
Adjust the shoulder strap or harness so the shoulder pad rests
comfortably on the off-side shoulder. Make sure all hooks and
adjustment devices are secure.
Emergency Release
∗ In case of emergency, strongly pull the white tab at the hook.
The machine will be released from the strap.
18