Specifications - Shindaiwa T243XS Bedienungsanleitung

Specifications

External dimensions:
Length × Width × Height
Mass:
Unit without fuel, cutting attachment and guard (ISO11806)
Unit with fuel, specified cutting attachment, guard and harness
Volume: Fuel tank
Cutting attachment
Nylon line cutter type
Nylon cord size(dia)
Nylon cord length
Thread
Gear ratio: Gear ratio and lubrication
Rotational direction of output shaft seen from above:
Engine:Type
Engine displacement
Maximum shaft brake power, measured in accordance with ISO 8893
Engine speed at maximum engine power
Recommended maximum engine speed (With STD attachment in-
stalled)
Recommended engine idling speed
Carburettor
Ignition
Spark plug
Starter
Clutch
Fuel:
Oil
Ratio
Fuel consumption at maximum engine power
Specific fuel consumption at maximum engine power
Vibration levels: (ISO 22867)a
Sound pressure level: (ISO 22868) LpAeq
Uncertainty : (K )
pA
Sound power level:(ISO 22868) L
These specifications are subject to change without notice.
hv,eq
(= L + K )
WAd WARa WA
Specifications
T243XS
1725 × 379 × 323 mm
5.1 kg
6.7 kg
0.69 L
Speed Feed 375
2.4 mm
3 m
Left-handed M7×1.0
1.36 reduction and good quality lithium grease
Anticlockwise
Air cooled two stroke, single cylinder
3
23.9 mL (cm
)
0.8 kW
8000 r/min
10300 r/min
3000 r/min
Diaphragm type
Flywheel magneto - CDI system
NGK BPMR8Y
Recoil starter
Automatic centrifugal clutch
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing me-
thyl alcohol or more than 10 % of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Standard
(ISO/CD 13738), JASO FC,FD grade and Shindaiwa
One 50:1 oil.
50:1 (2%)
0.58 L/h
575 g/(kW•h)
Front handle 8.8 m/s
Rear handle 7.2 m/s
Uncertainty 1.2 m/s
96.0 dB(A)
1.5 dB(A)
110.3 dB(A)
34
C243S
1727 × 577 × 493 mm
5.3 kg
6.9 kg
2
Right handle 4.7 m/s
2
Left handle 4.9 m/s
2
Uncertainty 1.2 m/s
94.1 dB(A)
1.5 dB(A)
108.9 dB(A)
2
2
2