Volume; Audio Control; Speaker Setting - Kenwood KRC-694 Bedienungsanleitung

General features

Volume

Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
System Q
You can recall the best sound setting preset for different types of
music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [System Q] button.
Each time the button is pressed the sound setting switches.
Sound setting
Flat
User memory
Rock
Pops
Easy
Top 40
Jazz
• User memory: The values set on the <Audio control> (page 6).
• Each setting value is changed with the <Speaker setting> (page
6).
First, select the speaker type with the Speaker setting.
Display
"Flat"/ "FLAT"
"User"/ "USER"
"Rock"/ "ROCK"
"Pops"/ "POPS"
"Easy"/ "EASY"
"Top40"/ "TOP40"
"Jazz"/ "JAZZ"
— 6 —

Audio Control

1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUD] button for at least 1 second.
3
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
4
Adjust the Audio item
Press the [4] or [¢] button.
Adjustment Item Display
Bass level "Bass"/ "BAS"
Middle level "Middle"/ "MID"
Treble level "Treble"/ "TRE"
Balance "Balance"/ "BAL"
Fader "Fader"/ "FAD"
Volume offset "V-Offset"/ "V-OFF" –8 — ±0
Loudness "LOUD"
Volume offset: Each source's volume can be set as a difference
from the basic volume.
5
Exit Audio Control mode
Press the [AUD] button.

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting
the speaker type.
Range
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15
ON/OFF