PCE Instruments DHS15K Benutzerhandbuch Seite 15

Press HOLD/UNIT to change Manual-Zero option. Manual -Zero
can also be set to 0%F.S., 2%F.S., 4%F.S., 10%F.S., 20%F.S.,
50% F.S.
Press TARE/ZERO to enter Backlight option;
Press HOLD/UNIT to change Backlight option.
Backlight can be set to off (disabled), 5 (5sec), 15 (15sec), 30
(30sec), 60 (60sec), on (never).
- When Backlight is set to 5, 15, 30, or 60, scale turns off
backlight in corresponding seconds after it is stable.
- When Backlight is set to off, backlight is disabled, and never
turns on.
- When Backlight is set to on, scale never turns off backlight, no
matter it is stable or not.
Press TARE/ZERO to exit the Settings Mode.
15