Bluetooth Operation - Roadstar HIF-1996D+BT Bedienungsanleitung

5 English
CD PROGRAMMING
You can program up to 99 tracks to play in any desired order.
1. Insert a disc and press STOP (15) (6 on remote) when it starts playing.
2. Press (8) on remote. "P01" will be shown on the display.
3. Press SKIP -/+ (16/17) (12/13 on remote) to select your favorite tunes.
4. Press (8) on remote to store the track in the program memory. "P02" will be shown on the
display.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press PLAY/PAUSE (14) (9 on remote) to start program play.
7. Press STOP (15) (6 on remote) once to stop the program play. Press STOP (15) (6 on
remote) twice to clear programme.
LISTENING TO RECORDS
VERY IMPORTANT!
To prevent damages from transportation, a transit screw is located at the upper right side of
the turntable platform. Before start playing, use a screwdriver and turn the transit screw in
clockwise direction (screw going down) completely. In case of transportation, remember to
clock again this screw in counter-clockwise direction to prevent damages.
1. Press MODE (8) (5 on remote) repeatedly to select PHONO mode.
2. Open the Record Player Cover. Release the Tonearm Clamp, and remove the stylus pro-
tector. Place a record on the turntable, over the central spindle. Place the EP adapter o-
ver the central spindle when playing 17cm EP records.
3. Set 33/45/78 RPM SPEED SELECTOR (32) to 33 / 45 / 78 rpm according to the record.
4. Lift the Tonearm with the Tonearm Lift Lever. Move the tonearm to the beginning of the
record, or to the start of a particular track. Gently lower the tone arm onto the record with
the Tonearm Lift lever to start playing.
5. When the record is finished the tonearm will automatically stop and return automatically
to the rest. To stop manually, lift the tonearm from the record and return it to the rest.
6. Moving or jarring the turntable without securing the Tonearm clamp could result in dama-
ge to the Tonearm. Replace the protective cap on the stylus when not in use.
AUX-IN
This unit provides an auxiliary audio input jack for connecting external audio device like MP3
players, CD players and allow playback of your external source through the system speakers.
1. Use an audio cable (not included) with a RCA stereo plugs on one end of the cable. Plug
one end into the AUX-IN jack on the main unit and plug the other end of the cable into
the LINE OUT or HEADPHONE Jack of your external audio device.
2. Turn ON the unit and your external audio device. Press MODE (8) (5 on remote) repea-
tedly to select CD mode.
3. Start to play the external device (see the user manual of the external device).

BLUETOOTH OPERATION

1. Press BT (9) to select BLUETOOTH function. "BT" will be shown on the display.
2. Select from your portable device (Smartphone, Tablet...) the ID Bluetooth tagged as HIF-
1996D+BT, then confirm connection.
3. When the pairing is successful the LED will stop blinking.
4. Now you can transfer the music to the HIF-1996D+BT and all operations can only be o-
perated from your mobile device.