Specifications - Philips 43HFL2839T/12 Bedienungsanleitung

• The picture quality may degrade when two devices
are connected to the TV at the same time. In such
a case, disconnect one of the devices.
No picture
• This means your TV is not receiving any transmission.
Make sure the correct source has been selected.
• Is the antenna connected properly?
• Is the antenna cable damaged?
• Are suitable plugs used to connect the antenna?
• If you are in doubt, consult your dealer.
No sound
• Check if the TV is muted. Press the Mute button or
increase the volume to check.
• Sound may be coming from only one speaker.
Check the balance settings from Sound menu.
Remote control - no operation
• The batteries may be exhausted. Replace the
batteries.
Input sources - can not be selected
• If you cannot select an input source, it is possible
that no device is connected. If not;
• Check the AV cables and connections if you are
trying to switch to the input source dedicated to the
connected device.

Specifications

TV Broadcasting
Receiving Channels
Digital Reception
Number of Preset
Channels
Channel Indicator
RF Aerial Input
Operating Voltage
Audio
Audio Output Power
(WRMS.) (10% THD)
Power Consumption
(W)
TV Dimensions DxLxH
(with foot) (mm)
TV Dimensions DxLxH
(without foot) (mm)
Display
Operation temperature
and operation humidity:
English - 8 -
PAL BG/DK/II'
SECAM BG/DK/LL'
VHF (BAND I/III) - UHF (BAND
U) - HYPERBAND
Fully integrated digital
terrestrial-cable TV(DVB-
T-C)
(DVB-T2 compliant)
1000
On Screen Display
75 Ohm (unbalanced)
220-240V AC, 50Hz.
German+Nicam Stereo
2x8W
75W
220 x 974 x 617
65/94 x 974 x 572
43" (109 cm)
0ºC up to 40ºC, 85% humidity
max