Cordless Drill/Driver; Noise/Vibration Information - Bosch AdvancedDrill 18 Originalbetriebsanleitung

18 | English
– Screws (first screw phase)
– Drilling/impact drilling (second screw
phase)
Impact rate
Max. torque, hard/soft screwdriving applica-
tion according to ISO 5393
Max. drilling diameter
– Masonry
– Steel
– Wood
Tool holder
Max. screw diameter
Weight according to EPTA-Procedure
01:2014
Permitted ambient temperature
– during charging
– during operation B) and during storage
Recommended batteries
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C

Noise/Vibration Information

AdvancedDrill 18
Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted sound pressure level of the power
tool is less than 70 dB(A). Uncertainty K = 3 dB. The noise
level when working can exceed 80 dB(A).
Wear hearing protection
Total vibration values ah (triax vector sum) and uncertainty K
determined according to EN 62841-2-1, EN 62841-2-2:
Drilling in metal: a < 2,5 m/s
h
Screwdriving: a < 2,5 m/s
2
h
AdvancedImpact 18
Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 85 dB(A); sound power level
96 dB(A). Uncertainty K= 3 dB.
Wear hearing protection
Total vibration values ah (triax vector sum) and uncertainty K
determined according to EN 62841-2-1, EN 62841-2-2:
1 609 92A 4BE | (07.09.2018)
2 , K= 1,5 m/s 2 ;
, K= 1,5 m/s .
2

Cordless drill/driver

AdvancedDrill 18
rpm
rpm
rpm
Nm
mm
mm
mm
mm
kg
°C
°C –20 to +50
PBA 18 V... V
PBA 18 V... W
AL 1815 CV
AL 1830 CV
AL 1880 CV
Drilling in metal: a < 2,5 m/s
h
screwdriving: a < 2,5 m/s
h
impact drilling in concrete: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
used for a preliminary estimation of vibration and noise
emissions.
The given vibration level and noise emission value represent
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Cordless combi drill
AdvancedImpact 18
0–430
0–1350
–
36/24 A)
–
13
35
1.5–13
10
1.0 A)
0 to +45
PBA 18 V... W
2 , K= 1,5 m/s 2 ;
, K= 1,5 m/s ;
2 2
= 19, K= 1,5 m/s 2
h
Bosch Power Tools
0–450
0–1500
0–22,500
36/22 A)
11
13
35
1.5–13
10
1.1 A)
0 to +45
–20 to +50
PBA 18 V... V
AL 1815 CV
AL 1830 CV
AL 1880 CV
.