Using The Product As Intended; Contents; Safety Notes - Märklin 60947 Bedienungsanleitung

Using the Product as Intended

The 60945/60946/60947 decoders are for converting
Märklin/Trix H0 locomotives to digital.
!
Not suitable for motors with fi eld-wound coils. Loco-
motives with these motors must be converted with the
appropriate motor retrofi t kits, item numbers 60941, 60943,
or 60944.
!
Important: The following locomotives (locomotive-specifi c
decoder) cannot be converted with this decoder.
Item:
37346
26410
37403
26453
37404
26490
37435
26557
37485
26561
37501
26562
37504
29094 (only E 94)
37505
29440 (only E 10)
37530
29500 (only E 50)
37542
37010
37573
37011
37574
37044
37575
37226
37580
37227
37581
37239
37607
37274
37733
37275
37734
37321
39340
37777
39343
37786
39390
37787
39392
37790
39393
37791
39399
37867
39404
37940
39441
37941
39563
37993
39564
39014
39565
39022
39643
39051
39836
39081
39837
39110
39838
39123
39896
39140
39972
39185
39986
39303
Contents as Delivered
1 decoder
1 circuit board with a 21-pin connector
1 Circuit board retainer
1 Screw
1 speaker small
1 speaker big
1 Adhesive pad
Installation instructions
Warranty card
Tools also needed for the installation procedure include:
regular and cross-point screwdrivers, tweezers, and solder-
ing station with a maximum soldering temperature of up to
30 watts / 300˚Celsius / 572˚Fahrenheit with a fi ne tip, solder-
ing fl ux for electronics (0.5 - 1 mm / 0.02" – 0.04" diameter),
de-soldering braid or a de-soldering pump.

Safety Notes

• WARNING! Sharp edges and points required for operation.
• Do wiring and assembly work only on a voltage-free or
grounded work mat. Failure to do this can lead to danger-
ous static charge from your body and to damage to the
components.
• Operate the decoder only with the authorized voltage
(see technical data).
There is a danger of burning yourself when working
with a soldering station.
25