LD Systems LD LAX8D Bedienungsanleitung Seite 15

You can connect unbalanced equipment to balanced inputs and outputs. Simply follow these schematics.
Strain Clamp
Strain Clamp
Strain Clamp
Hot (+)
Cold (-)
Use for Balanced Mic Inputs
(For unbalanced use, connect pin 1 to 3)
3-pin XLR male plug
(seen from soldering side)
Tip
Sleeve
Ring
Sleeve=Ground/Screen
Use for Headphone, Stereo Return
1/4" Stereo (TRS) Jack Plug
Tip
Sleeve
Sleeve=Ground/Screen
Use for Mono Line In, Mono 1/4"Jack Plugs
1/4" Mono (TS) Jack Plug
Tip
Sleeve
Ring
Sleeve=Ground/Screen
Use for Pre-Gain Channel Inserts
1/4" Stereo (TRS) Jack Plug
Ground/Screen
2
1
3
WIRING CONFIGURATION:
Ring=Right Signal
Tip=Left Signal
Tip=Signal
Ring=Return Signal
Tip=Send Signal
Hot (+)
2
1
3
Cold (-)
Use for Main output
(For unbalanced use, leave pin 3 unconnected)
3-Pin XLR line socket
(seen from soldering side)
Ground/Screen
15