Function And Device Overview - HomeMatic IP HmIP-FAL230-C6 Installations- Und Bedienungsanleitungen

Function and device overview

Observe the installation instructions for installa-
tion in distribution systems (DIN VDE 0100-410).
The device may only be operated within residen-
tial buildings.
Using the device for any purpose other than that
described in this operating manual does not fall
within the scope of intended use and shall invali-
date any warranty or liability.
3 Function and device overview
The Homematic IP Floor Heating Actuator offers
comfortable and demand-based room-by-room control
of your floor heating system via smartphone app or
the Homematic IP Wall Thermostat, according to your
personal needs.
The floor heating actuator can be used for controlling a
floor heating system with up to 6 heating zones/9 heating
circuits as well as a heating pump or circulation pump.
Furthermore, the device offers operation in heating or
cooling mode (provided that your heating system offers
these operating modes).
You can flexibly mount the device using the supplied
screws or a DIN rail. With the secure radio communication
50
between the Homematic IP devices, the wiring effort is
kept to a minimum.
Device overview (see fig. 1):
(A)
System button (teach-in/pairing button and LED)
(B) Select button (channel button and LED)
(C) Slot for opening
(D) Cover
(E)
Spring latch for DIN rail mounting
(F)
PE connecting terminals
(G) N (neutral conductor) and L (phase conductor)
connecting terminals
(H) Heating valves or heating pump connecting termi-
nals
(I) Heating valves connecting terminals
Cable bushings (see fig. 2):
(J)
Cable bushing 1
(K) Cable bushing 2
(L) Cable bushing 3
Function and device overview
51