Grizzly ARM 4051 A Originalbetriebsanleitung Seite 29

• Do not work without the grass
bag or collision guard. Keep
away from the ejection hole at
all times.
• Do not start the motor while
standing in front of the dischar-
ge duct.
Caution! Danger! The blade
continues to run after swit-
ching off.
There is a risk of injury.
• The equipment is not to be
lifted or transported while the
motor is running. Switch off the
equipment if it has to be tilted in
transit, when crossing surfaces
other than grass, and when the
equipment is being transported
to and from the surfaces to be
mowed.
• Always keep the grass ejection
hole clean and clear. Remo-
ve cut material only when the
equipment is stopped.
• Do not leave the equipment un-
attended in the workplace.
• Do not work with equipment
that is damaged, incomplete, or
has been modified without the
authorisation of the manufactu-
rer. Do not use the equipment
with damaged safety devices or
screens or with missing safety
equipment such as deflection
and/or grass collection devices.
• Do not overload the equipment.
Work only within the specified
power range and do not change
the regulator settings on the
motor. Do not use low-powered
machines for heavy work. Do
not use your equipment for
purposes other than those for
which it is designed.
• Do not use the equipment near
inflammable liquids or gases.
Non-observance will result in a
risk of fire or explosion.
• Switch the device off, pull out
the safety key and remove the
battery. Check that all moving
parts are at rest:
- Whenever you leave the ma-
chine,
- Before cleaning the
ejection hole or removing
blockages,
- When the equipment is out of
use,
- Before checking, cleaning or
working on the equipment,
- If the equipment has hit a for-
eign object or if strange vibra-
tions occur during work. In this
case, check the equipment for
damage and have it repaired if
applicable.
- Ensure that all nuts, bolts and
screws are tightened firmly
and the equipment is in safe
working condition.
• Check the mower for any da-
mages.
• Repair damaged parts as ap-
propriate.
• Do not place feet or hands near
or verwendet wird, under rotating
parts. Do not stand in front of
the grass ejection hole during
sickle mowing.
• Always pull the circuit breaker/
ignition key if:
- You leave the garden device,
before removing blockages,
- if you are examining,
cleaning or working on the
garden device
GB
29