Yealink SIP-T48G Schnellstartanleitung Seite 10

E
N
2. Enter the number of the second party, and then tap the Send soft key.
G
3. Tap the Conference soft key again when the second party answers.
All parties are now joined in the conference.
L
4. Tap the End Call soft key to disconnect all parties.
I
S Note: You can split the conference call into two individual calls by tapping the Split soft key.
H
Message waiting indicator on the idle screen indicates that one or more voice messages are
waiting at the message center. The power indicator LED slowly flashes red.
and then tap the Connect soft key, or press
1. Tap
2. Follow the voice prompts to listen to your voice messages.
1. When the phone is idle, tap
2. Tap or , or press
3. Tap after the desired entry, and then you can do the following:
Tap Send to place a call.
Tap Add to add the entry to the local directory.
Tap Edit to edit the phone number of the entry before placing a call.
Tap Blacklist to add the entry to the blacklist.
Tap Delete to delete the entry from the list.
To add a contact:
1. When the phone is idle, tap
2. Tap Add to add a contact.
3. Enter a unique contact name in the Name field and contact numbers in the corresponding
fields.
4. Tap the soft key to accept the change.
To edit a contact:
1. When the phone is idle, tap
2. Tap after the desired contact.
3. Edit the contact information.
4. Tap the soft key to accept the change.
To delete a contact:
1. When the phone is idle, tap
after the desired contact, and then tap Delete.
2. Tap
3. Tap the OK soft key when the touch screen prompts "Delete the selected contact?".
Note: You can add contacts from the call history easily. For more information, refer to
Press during a call to adjust the receiver volume of the handset/speakerphone/
headset.
Press when the phone is idle to adjust the ringer volume.
6
(Ensure the voice mail code is already configured on the phone):
, and then tap the desired call list on the left.
or to scroll to the desired page.
, and then tap the desired group on the left.
, and then tap the desired group on the left.
, and then tap the desired group on the left.
.
above.