Grundig VCC 7070 A Bedienungsanleitung Seite 19

SAFETY ___________________________________
▪
Do not dismantle the appli-
ance under any circumstanc-
es. No warranty claims are
accepted for damage resulting
from improper handling.
▪
The vacuum cleaner is very
powerful; thus before plugging
the cord into the wall socket,
make sure the switch is in the
'of' position. Hold the vacuum
cleaner irmly when starting and
while using it.
▪
If the inlet, hose or telescopic
tube is blocked, switch of the
vacuum cleaner and remove the
blockages before re-starting the
vacuum cleaner.
▪
Washing ilters improves vac-
uum performance. Make sure
all the ilters are completely dry
before inserting back into the
vacuum cleaner.
Caution
The motor is equipped with a
thermal cut-out. If for any rea-
son, the vacuum cleaner should
over-heat, the thermostat will
automatically turn the unit of.
Should this occur, unplug the vac-
uum cleaner from the wall socket.
Remove the dirt container and
empty. Clean the ilters. Allow the
cleaner to cool for approximately
1 hour. Continue operating the
appliance by inserting the pow-
er plug into the wall socket and
switching it back on. If the appli-
ance does not start, wait another
30 minutes and repeat the above-
mentioned steps.
19
ENGLISH