Operation Of The Buttons - mundoclima MUPR-12-H6 Installationshandbuch

OPERATION OF BUTTONS
1 ON/OFF
2
MODE
3
FAN
4
SLEEP
TURBO SELF CLEAN
5
6
RG57A6/BGEF
SILENCE
FP
TIMER
ON
TEMP
TIMER
OFF
SWING DIRECT
LED FOLLOW ME
ON/OFF Button
1
This button turns the air conditioner ON
and OFF.
MODE Button
2
Press this button to modify the air conditioner
mode in a sequence of following:
AUTO
3 FAN Button
Used to select the fan speed in four steps:
AUTO
NOTE: You can not switch the fan speed in
AUTO or DRY mode.
4
SLEEP Button
Active/Disable sleep function. It can
maintain the most comfortable temperature
and save energy. This function is available
on COOL, HEAT or AUTO mode only .
13
For the detail, see sleep operation in
"OWNER'S MANUAL".
NOTE: While the unit is running under SLEEP
12
mode, it would be cancelled if MODE, FAN
SPEED or ON/OFF button is pressed.
11
5 TURBO Button
Active/Disable Turbo function. Turbo function
enables the unit to reach the preset temper-
10
ature at cooling or heating operation in the
shortest time(if the indoor unit does not support
9
this function, there is no corresponding
operation happened when pressing this button.)
8
SELF CLEAN Button
6
Active/Disable Self Clean function
7
7
LED Button
Disable/Active indoor screen Display. When
pushing the button, the indoor screen display
is cleared, press it again to light the display.
8
FOLLOW ME Button
Push this button to initiate the Follow Me
feature, the remote display is actual
temperature at its location. The remote
control will send this signal to the air
conditioner every 3 minutes interval until
press the Follow Me button again. The air
conditioner will cancel the Follow Me feature
automatically if it does not receive the signal
during any 7 minutes interval.
118
COOL HEAT
DRY
LOW MED HIGH
, ,
2
FAN
,,