Selection Of Installation Equipment / Dimensions - Schneider IF 77-1.2 FZBWSG Bedienungsanleitung

 If the hob is installed above an oven, the oven must be equipped with a cooling
system.
 Install a thermal protection below the bottom of the appliance when installing it
above a drawer or a cupboard.
 The circuit breaker must be easily accessible.

2.3 Selection of installation equipment / Dimensions

Cut out the installation hole as described on the drawing below. For installation
and use, a minimum of 50 mm space shall be preserved around the hole. The
thickness of the work top should be at least 30 mm. Choose heat-resistant materials
for the work top only to avoid any deformation caused by the heat-radiation of the
appliance.
L (mm) W (mm)
770 520
H (mm) D (mm)
62 58
A (mm) B (mm)
740 490
1. Seal
X (mm)
min.50
60