Werbung
Stopwatch minute hand
(Move in minute increments)
ADJUSTING THE STOPWATCH HAND POSITION
Before setting the time , check if the stopwatch second and minute hands are in the "0"(12 o'clock) position.
*If the stopwatch is in use , press the button in the following order to reset it , and then , check if the hands
return to "0" position. (For details , see "HOW TO USE THE STOPWATCH")
* If the stopwatch is counting :
* If the stopwatch is stopped :
* If the split time is displayed :
If either of the stopwatch hands are not in the "0" position , reset them following the procedure below.
1.Pull the crown out to
the second click.
*The stopwatch minute hand moves correspondingly with the stopwatch second hand.
*The hands move quickly if the respective buttons are kept pressed.
DISPLAY AND CROWN / BUTTON OPERATION
Minute hand
Hour hand
Second hand
24-hour hand
(Indicates the time on a 24-Hour basis)
A
B
B
B
A
Stopwatch minute hand
2.Press button A or B to reset the
stopwatch second and minute
hands to "0"position.
*By pressing button A set the
Stopwatch second hand.
*By pressing button B set the
Stopwatch minute hand.
SII Products
OPERATION
Stopwatch second hand
(Move in second increments)
Crown at normal position
B
Stopwatch second hand
A
B
Button "A"
In stopwatch function
Start / Stop
First click
Date setting
Second click
Time setting
Button "B"
In stopwatch function
Split / Slit release / Reset
3.Push the crown back to
the normal position.
Version-01
VD52C
8
Werbung
