bürkert 8032 Bedienungsanleitung Seite 9

Current consumption
Pulse input
Protection against
polarity reversal
Transistor output
Protection against
short-circuits
Recommended cable type
Power supply
Measuring device
electrical connection
Wall-mounted version
Panel-mounted version
8032
max� 750 mA + consumption of the measuring device, if output PNP is connected
max� 50 mA + consumption of the measuring device, if output PNP is not connected
frequency range: 2 to 400 Hz; Input impedance: 10 kW
to be connected to an NPN transistor output or a push-pull output
Pulse input
U1
U2
T1
T
yes
NPN and PNP, 700 mA max�
NPN output: 30 VDC max�
PNP output: controller voltage supply
yes for the transistor output
Wall-mounted version: shielded, section between 0,14 and 0,5 mm
Panel-mounted version: shielded, 2,5 mm
1,5 mm 2 max� section for stranded wires with sleeves
max� distance: 10 m, 0,5 mm
5-pin M12 female cable plug and 4-pin M12 male cable plug (not supplied)
Terminal strips
4,5 V < U1 < 5 V
0 V < U2 < 0,5 V
t
max� section for single wires or
2
2 max� section

2