Cleaning Stop - WimTec ECOSAN W6 Montage- Und Bedienungsanleitung

EN
ECOSAN W6
Description of the functions

Cleaning stop:

DIP switch 2
Serves to disable the fi tting prior to cleaning�
"ON" position = Cleaning stop function enabled�
"OFF" position = Cleaning stop function disabled (preset)�
Activate cleaning stop:
Deactivate cleaning stop:
3 min |
34 Washbasin fi tting
1.
Hold the magnetic pen to the cleaning stop sensor�
2.
After the monitoring LED fl ashes fi ve times, the water fl ow
is stopped and the cleaning stop is enabled for 3 min�
While the cleaning stop function is enabled,
the monitoring LED will light up two times every 3 s�
5 x
Automatic:
The fi tting will automatically resume normal operation 3 min
after activating the cleaning stop function�
Manuell:
1. To resume prematurely, continue holding the
magnetic pen to the cleaning stop sensor�
2. After the LED fl ashes three times, the water fl ow is
3 x
started and the cleaning stop is stopped� The fi tting
will resume normal operation�
WimTec ECOSAN W6
ON
OFF
2 3 4 5 6