RSCC
1
Scope of supply
1 RSCC load cell
1 RSCC mounting instructions
Accessories (not included in the scope of supply):
Knuckle eyes for mounting the load cells
RSCC with maximum capacities 50 kg to 100 kg
Order no. 1-U1R/200KG/ZGW
RSCC with maximum capacities 200 kg to 1 t
Order no. 1-U2A/1T/ZGUW
RSCC with maximum capacities 2 t to 5 t
Order no. 1-U2A/5T/ZGUW
2
Application instructions
The RSCC type series load cells are suitable for measuring axial loads in the
tensile direction. Because they provide highly accurate static and dynamic
load measurements, they must be handled very carefully. Particular care must
be taken when transporting and installing the devices. Dropping or knocking
the transducers may cause permanent damage.
The Specifications section on page 17 lists the permissible limits for
mechanical, thermal and electrical stress. It is essential that these are taken
into account when planning the measuring set‐up, during installation and,
ultimately, during operation.
WARNING
Incorrect handling or installation can lead to loss of explosion
protection
It is essential to comply with the relevant installation regulations during
installation.
There must be compliance with the installation conditions cited in the
Certificate of Conformity and/or the Type Examination Certificate.
A3018-3.2 en/de/fr
7
HBM