Assembly Of Grass Box; Engine Starting - Ikra BRM 1040 P Gebrauchsanweisung

ASSEMBLY OF GRASS BOX

illustration 4
illustration 5
1. To fit: Raise the rear cover and hitch the grass bag on
rear of mower. (Fig. 4,Fig. 5)
2. To remove: grasp and lift the rear cover, remove grass
bag.
GB | Operating Instruction
Before using the machine you must read the separa-
ted Engine instruction book carefully and service the
engine with gasoline and oil.

ENGINE STARTING

Once the machine has been serviced properly, start the
engine as follow.
1. Standing behind the unit, grasp the brake control
2. Grasp the brake control handles as shown followed
illustration 6
Blade is in action as soon as engine started. While
the machine is working maintain the brake control
handle in working position. The engine will stop as
soon as you release the brake control handle.
When starting a new engine for the first time, firmly push
the yellow primer five times. Then for all future starts,
push the primer three times.
Note: If engine runs out of fuel or has been stored for an
extended period of time, it may be necessary to prime
5 times.
Note: Priming is usually unnecessary when restarting a
warm engine.
6
handle and hold it against the upper handle as shown
in figure followed.(fig. 6)
figure and pull up rapidly. Return it slowly to the rope
guide after engine starts. Release the brake control
handle can stop the engine and blade.
Attention: