Product Specification; Operating Controls; Before Use; Intended Use - Bosch AXT 2200 HP Bedienungsanleitung

Product Specification

Quiet shredder
Part number
Power consumption, S 6 (4/6 min)
Power consumption, S 1
No-load speed
Capacity max.
max. Branch diameter
Collecting bag
Weight. approx.
Protection class
1)
The S 6 operating mode (40 %) indicates a load profile of 4 min load and 6 min idle time. For practical application, contin-
uous operation is permitted.
2)
Depending on the hardness of the wood.

Operating Controls

1 On/Off switch
2 Rotational direction switch
3 Mains plug**
4 Undercarriage
5 Collecting bag/Cover*
6 Discharge chute
7 Allen Key
8 Adjustment knob
9 Hooks for collecting bag
10 Feed intake
11 Serial Number
*Optional accessory
**Country specific
*Not all of the accessories illustrated or described are
included as standard delivery.

Intended Use

The product is intended for cutting of fibrous and
woody garden waste for composting.
Assembly
Remove the machine from the package
(see figure ).
A
Remove the wooden pieces (transport protection)
(see figure ).
B
Mount the wheels and the undercarriage
(see figure ).
C D
When transporting without the stand, always
use the transport safety piece.
12 • F016 L70 439 • TMS • 06.02
1
[W]
[W]
[rpm]
[kg/h]
[mm]
[kg]
Always use the correct supply voltage! The volt-
age of the power source must agree with the value
given on the nameplate of the machine. Machines
designated for 230 V can also be operated with
220 V.
The circuit must at least be protected as follows:
AXT 2200 HP = 10 A,
AXT 2500 HP = 16 A.
When being operated with a generator the following
power rating is required:
AXT 2200 HP — 3,5 kVA/2800 W
AXT 2500 HP — 4,0 kVA/3300 W.
(e. g. Bosch generator units G-3600-series).
An extension cable with a cross section that is too
small causes a distinct reduction in the performance
capabilities of the machine. For cables to 25 m in
length, a cross section of at least 3 x 1,5 mm
quired, for cables more than 25 m in length, the
cross section must be at least 2,5 mm
Always completely unwind cable reels.
Remove earth from roots. Foreign material such as
stones, glass, metals, fabrics or plastics must not
enter the feed intake. Otherwise this could damage
the cutting roller 13.
English - 2
AXT 2200 HP
0 600 852 0..
2 200
2 000
40
2)
140
2)
38
included
25
/ I

Before Use

Always place the machine on firm level
ground. During operation, do not tilt or move.
AXT 2500 HP
0 600 852 1..
2 500
2 300
40
2)
150
2)
40
included
26
/ I
2
is re-
2
.