Use For Air Conditioner; Cool Mode; To Turn Off; Dry Mode - Sharp CV-P10PR Bedienungsanleitung

USE FOR AIR CONDITIONER

Use when the unit operates with the cool, dry, fan or ventilation mode. During operation,
Plasmacluster ions are always released into the room.
• The exhaust hose must be installed in these modes.
• Ensure that the stopcock is securely attached the drainpipe.

COOL MODE

1
Press the MODE button to select COOL mode.
COOL
2
Press the A/C button to start operation.
• The green AIR CON lamp will light.

TO TURN OFF

Press the OFF button.
• The green AIR CON lamp will turn off.
3
Press the TEMP button to set temperature.
• The temperature setting range: 18°C to 32°C.
4
Press the FAN button to set fan speed.
AUTO

DRY MODE

1
Press the MODE button to select DRY mode.
COOL
2
Press the A/C button to start operation.
• The green AIR CON lamp will light.
• The temperature cannot be set.
• The fan speed is preset to AUTO and cannot be
changed.
TO TURN OFF
Press the OFF button.
• The green AIR CON lamp will turn off.
NOTES:
• Although you can also operate dry mode without the exhaust hose, the unit generates heat during
operation and the room temperature will rise.
• It is also possible to operate in dry mode with hose (not included) attached.
Remove the stopcock and attach the hose to the drainpipe and lead to a fl oor drain to allow water to
drain from the unit.
DRY FAN
SOFT LOW
DRY FAN
VENT
HIGH
VENT
EN-10
2
1
3
4
2
1