Watching A Dvd Image; Connecting A Dvd Player; Displaying A Dvd Image; Using The Scart Output Function - Pioneer PDP-607XD Bedienungsanleitung

Enjoying through External Equipment

Watching a DVD image

Connecting a DVD player

Use the INPUT 2 terminal when connecting to a DVD player
and other audiovisual equipment.
Plasma Television (rear view)
SCART cable
(commercially
available)
When using
component
cable, select
"COMPONENT"
for "Input Select"
in the menu. See
page 53.
At the same time
connect a SCART
cable to input
audio signals.

Displaying a DVD image

To watch a DVD image, press INPUT 2 on the remote control
unit or press INPUT on the Plasma Television to select INPUT2.
NOTE
• If DVD images do not come in clearly, you may need to
change the input signal type setting using the menu. See
page 53.
• Refer to your DVD player operation manual for the signal
type.
Component cable
(commercially
available)
DVD player

Using the SCART output function

This function allows you to record DTV programmes with a
connected VCR or other recording equipment while enjoying
watching the Plasma Television as usual. With this function,
you can also easily enjoy timeshift playback when a DVD/HDD
recorder (DVR) is in connection.
The following diagram assumes that you connect a Pioneer
DVR-540H to the Plasma Television so that you can enjoy
timeshift playback with the recorder.
Plasma Television (rear view)
SCART cable
(commercially
available)
DVR-540H
In addition to the above connections, you need to perform the
following:
• See "Switching the SCART output" (page 62) and select
"Fixed on DTV" for "SCART Output" in the Setup menu.
• On the DVD/HDD recorder (DVR), select the video/audio
input source matching the external input terminal to which
the Plasma Television has been connected. For this method,
see the operation manual that came with the recorder.
• Select the input source on the Plasma Television depending
on the terminal to which the output of the DVD/HDD
recorder (DVR) has been connected; for the above
connection example, select INPUT 2.
When you complete the above connections and setups, you
can then enjoy timeshift playback with the DVD/HDD recorder
(DVR). You can also select the 2-screen or picture-in-picture
mode to watch images coming from the DTV input source and
an external input source (INPUT 2 for the above connection
example) to which the output of the recorder has been
connected.
NOTE
• Some DVD/HDD recorders (DVRs) may not allow timeshift
playback. Check the operation manual that came with your
recorder.
• For details about connection and setting procedures, see the
operation manual that came with your DVD/HDD recorder
(DVR).
12
SCART cable
(commercially
available)
61
En