Würth master EMS 10-A Originalbetriebsanleitung Seite 9

OBJ_BUCH-1106-001.book Page 9 Monday, December 21, 2009 3:57 PM
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious
injury.
❏ See data sheet for further safety warnings
and instructions.
❏ Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
❏ Use the machine only for dry sanding. Pen-
etration of water into the machine increases the
risk of an electric shock.
❏ Keep hands away from the sawing range.
Do not reach under the workpiece. Contact
with the saw blade can lead to injuries.
❏ Use suitable detectors to determine if util-
ity lines are hidden in the work area or
call the local utility company for assist-
ance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage or may cause an electric shock.
❏ When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
❏ Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
❏ Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from light
alloys can burn or explode.
Intended Use
The machine is intended for sawing and cutting
wooden materials, plastic, gypsum, non-ferrous
metals and fastening elements (e. g. nails, staples).
It is also suitable for dry sanding and scraping of
small surfaces. It is especially suitable for working
close to edges and for flush cutting.
For damage caused by usage other than intended,
the user is responsible.
21.12.09
For Your Safety
❏ Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat,
e. g., against continuous intense
sunlight, fire, water, and moisture.
Danger of explosion.
❏ In case of damage and improper use of
the battery, vapours may be emitted. Pro-
vide for fresh air and seek medical help in
case of complaints. The vapours can irritate
the respiratory system.
❏ When the battery is defective, liquid can
escape and come into contact with adja-
cent components. Check any parts con-
cerned. Clean such parts or replace them, if
required.
❏ Use the battery only in conjunction with
your Würth power tool. This measure alone
protects the battery against dangerous overload.
❏ Wear protective gloves when changing
application tools/accessories. Application
tools/accessories become hot after prolonged
usage.
❏ Do not scrape wetted materials (e. g. wall-
paper) or on moist surfaces. Penetration of
water into the machine increases the risk of an
electric shock.
❏ Do not treat the surface to be worked with
solvent-containing fluids. Materials being
warmed up by the scraping can cause toxic
vapours to develop.
❏ Exercise extreme caution when handling
the scraper. The accessory is very sharp; dan-
ger of injury.
❏ Use only original Würth accessories.
English–9