Maintenance And Cleaning - ROWENTA Espremio ES 6200 Bedienungsanleitung

• In order to obtain good frothy milk, the milk
should be very fresh and very cold.
recommend using pasteurised or UHT milk,
and not using untreated milk.
• During operation, it is normal for the
temperature light of the ON/OFF button to
light up and then extinguish.
• When the liquid is hot and/or frothy, switch
off the appliance (selector d1 in the position
"0").
• When the selector d1 is in the position "0",
the appliance cools down automatically.
During the cooling down phase, the LED of
the ON/OFF button flashes, and hot water
runs into the drip tray. When the optimal
temperature for preparing an espresso is
reached, the LED remains lit.
IMPORTANT!
Once the steam has been stopped, clean
the steam nozzle immediately and tho-
roughly using a damp sponge (to avoid
residues from sticking) and let a little more
steam run through into free air to rinse the
inside of the nozzle.
WARNING!
The steam nozzle is still hot!
Be careful not to burn yourself.
8. MAINTENANCE AND CLEA-
NING
The accessories and removable parts of the
appliance are not dishwasher proof.
A. The appliance
• Unplug the machine each time before
cleaning and leave the appliance to cool
down.
• Clean the outside of the appliance from time
to time with a damp sponge. Wash the tank,
the drip tray and its grill regularly and dry
them.
• Rinse the inside of the tank regularly.
• When a fine white film obscures the tank,
carry out a descaling operation.
(see paragraph 9. DESCALING).
• Do not use alcohol or solvent based
cleaning products.
• Once the appliance has been unplugged,
clean the hot water grill and the seal
regularly, using a damp sponge
We
B. The filter holder
The appliance that you have purchased is
equipped with a removable ejecting filter
holder, which allows you to maintain it in
perfect working order. We recommend that you
clean it each time after use.
These removal/fitting operations must be
carried out when the machine has cooled
down.
1.
Removal of the filter holder:
• Remove the filter holder from your machine.
• Dispose of the used coffee or pod by pressing
the ejection button
• Rinse in clear water.
• Hold the bottom of the filter holder between
your thumb and index finger.
• Exert pressure on it with the thumb and index
finger at the same time, then pull it
(fig. 17)
downwards
2.
Cleaning and rinsing the filter holder:
The filter holder may then be cleaned using a
household detergent and a scouring pad, but
must be rinsed afterwards in clear water. For
best results, you may actuate the ejection
button several times while rinsing.
We recommend shaking your filter holder
vigorously in order to evacuate all water.
3.
Fitting the filter holder:
First inset the bottom of the filter holder into
the slot provided for this purpose, then push it
in until you hear a "click" which ensures that it
is locked into place
C. The drip tray
As soon as the level gauge appears, the drip
tray must be emptied after first removing the
(fig. 19 and 20).
grill
The presence of water is normal and is not the
sign of a leak. If required, clean the drip tray
and its grill with water and a little non
aggressive detergent. Rinse and dry.
17
(fig. 16)
(fig. 11)
.
.
(fig. 18)
.
.
ENG