Connecting External Equipment - A Guide To Connecting Equipment To The Back Of The Television - Toshiba 46WM48 Series Bedienungsanleitung

Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
IN
OUT
IN/OUT
IN
OUT
WE RECOMMEND THAT YOU USE SCART LEADS IN
ADDITION TO AERIAL CABLES WHEREVER POSSIBLE
Aerial cables:
Connect the aerial to the socket on the rear of the
television. If you use a decoder* and/or a video
recorder it is essential that the aerial cable is connected
through the decoder and/or through the video
recorder to the television.
SCART leads:
Connect the video recorder IN/OUT socket to the
television. Connect the decoder TV socket to the
television. Connect the video recorder SAT socket to
the decoder VCR socket.
Before running Auto tuning put your decoder and
video recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO
INPUT sockets will accept L and R audio signals.
In addition there is a fixed/variable external audio
output which enables the connection to a suitable Hi-Fi
unit, make sure the Speaker option in the Sound
menu is set to Off.
decoder*
TV VCR
SCART 1
(EXT 1)
SAT
video recorder
SCART 2 SCART 3
(EXT 2) (EXT 3)
COMPONENT VIDEO INPUT (EXT 4)
HDMI™ (High-Definition Multimedia Interface) is for
use with a DVD, decoder or electrical equipment with
digital audio and video output. It is designed for best
performance with 1080i high-definition video signals
but will also accept and display 480i, 480p and 720p
signals.
A wide variety of external equipment can be
connected to the back of the television, therefore
the relevant owners manuals for all additional
equipment must be referred to.
We recommend SCART 1 for a decoder, SCART 2 for
additional equipment and SCART 3 for a VCR.
If connecting S-VIDEO equipment, set the INPUT for
EXT3. See page 19.
If the television automatically switches over to monitor
external equipment, return to normal television by
pressing the desired programme position button.
To recall external equipment, press
between EXT1, EXT2, EXT3, EXT4C, EXT5,
HDMI or PC.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
6 6
HDMI™ INPUT
HDMI
B
to select