Air Filter; Removing And Fitting Air Filter - Beta Motorcycles ALP 200 Bedienungsanleitung

4
2
A
GB
4
1

AIR FILTER

Check after every ride.
3
REMOVING AND FITTING AIR
FILTER
Remove the saddle, the tank cover and the
under-saddle plastic shield, as described
in "Body disassembly and reassembly" on
page 58.
• Remove the cover 2 by loosening the
screw 3.
• Lift the battery holder, as shown in the
figure.
• Release the filter holder 4.
• Remove the filter unit 1.
WARNING:
After every intervention, check that nothing
has been left inside the filter box.
Reassemble proceeding in the reverse
order.
D
38