Herunterladen Inhalt Inhalt Diese Seite drucken

Overview Of Functions - Riester ri-vital Gebrauchsanweisung

Spot-check monitor
Vorschau ausblenden Andere Handbücher für ri-vital:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

!
Heed the operating manual
0124
CE mark
Do not use in the presence of flammable anaesthetic
Patient connector, type BF, defibrillation-proof
SN
Serial number
Used electrical and electronic devices should not be thrown away with
the regular trash but rather should be disposed of separately in accor-
dance with national and/or EU guidelines.
Safety class II device
No alarm function

Overview of Functions

Introduction
ri-vital
allows you to measure the oxygen saturation of arterial blood and permits non-in-
®
vasive measuring of a patient's blood pressure. The illuminated LC display shows the func-
tional oxygen saturation (SpO2) of the arterial blood, the pulse and the mean (MAP),
systolic (SYS) and diastolic (DIA) levels of the arterial blood pressure. The sensor used for
the SpO2 measurement can be inserted into the front of the device for safekeeping.
The device has a carrying handle which simultaneously serves as a storage place for the
blood pressure cuffs. The device can be optionally equipped with a holder for the ri-thermo
N thermometer.
Pulse Signal
A detected pulse beat is indicated with an acoustic signal at the moment of systole; the sig-
nal's pitch changes with the value of the oxygen saturation. This allows you to acoustically
track the pulse rate and the course of the oxygen saturation without continuously having to
keep an eye of the device's display. The pulse signal can be deactivated by pressing the
<<Mode>> button.
Built-in Li-Ion Battery
The device's battery permits mobile, battery-supplied operation. The frequency of the blood
pressure measurements affects the operating time without a power connection. With blood
pressure measurements taken at 10-minute intervals, the ri-vital
in battery-operated mode. A symbol on the display indicates the battery's remaining charge.
Connect the device to a power outlet with the included mains adaptor to charge it. It takes
about 8 hours to recharge a fully empty battery.You can operate the device without problem
while it is charging. No memory effect occurs due to the use of Li-ion technology.
®
will work up to 40 hours
®
23

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis