GBC CombBind C340 Bedienungsanleitung Seite 5

Setting up
• Your machine is ready to use when removed from the box.
Retain the packaging in case you need to return the machine
for repair.
• The punching mechanism is coated with a protective film of
lubricant, which will mark your paper. Clear this by punching
scrap sheets of paper until clean prior to binding.
Comb binding instructions
Each step relates to the illustrations throw-out at the front of
this manual.
Please open the quick start guide, located at the front of the
machine for reference.
1. Binding
1 Lift the lid and punch handle to the upright position.
2 Place entire document so it rests on the lid.
Measure document using colour coded guide (fig.1)
3
Open the lid of the machine and rest your document
(including any cover sheets you have chosen) against the lid
on the 'staging' area provided. Gently push the document
back against the lid and check the document size using the
colour coded guide on the staging area. You can leave your
document on the staging area in readiness to punch.
Select comb which fits your document (fig.2)
4
Use the comb size guide to select the size of comb that fits
your document i.e. 25 sheet document = 6mm comb.
Guarantee
Operation of this machine is guaranteed for two years from
date of purchase, subject to normal use. Within the guarantee
period, ACCO Brands Europe will at its own discretion either
repair or replace the defective machine free of charge. Defects
due to misuse or use for inappropriate purposes are not
covered under the guarantee. Proof of date of purchase will be
Register this product online at www.accoeurope.com
Setting up
- C450E
• Connect the binder to the electricity supply with the power
cord supplied.
• Switch ON using the ON/OFF switch located at the rear of the
binder by the power inlet socket.
• Wait while the binder goes through an automatic check
procedure, both LED's light up.
• When complete the green LED will remain ON.
• The binder is ready for operation.
m
WARNING: This appliance MUST be earthed.
If in doubt consult a qualified electrician.
Load comb onto machine (fig.3)
5
Insert the binding comb next to the white positional arrow
on the machine, behind the metal comb support fingers,
with the open side of the comb pointing upwards.
Note: If using GBC ProCombs™ the white arrow on your
comb should align to the white arrow on the machine.
Open comb by turning lever towards you
6
The coloured arrows adjacent to the opening comb act as
a guide as to how far to open in order to allow punched
sheets to be easily inserted.
Rotate the binding lever toward you until the comb binding
element opens sufficiently to insert your document.
required. Repairs or alterations made by persons not authorised
by ACCO Brands Europe will invalidate the guarantee. It is our
aim to ensure that our products perform to the specifications
stated. This guarantee does not affect the legal rights which
consumers have under applicable national legislation governing
the sale of goods.
G
5