Tone Controls; Physical Specifications - NAD C315BEE Bedienungsanleitung

LINE LEVEL INPUTS (DISC, CD, VIDEO, AUx, TUNER, TAPE) MEASURED AT SPEAKERS OUTPUT
Input impedance (R and C)
Input sensitivity (ref. rated power)
Maximum input signal
LINE LEVEL OUTPUTS
Output impedance

TONE CONTROLS

Treble
Bass
Continuous output power into 8Ω
2
Rated distortion (THD 20Hz - 20kHz)
Clipping power (maximum continuous power per channel 4Ω and 8Ω)
IHF Dynamic headroom
IHF dynamic power (maximum short term power per channel)
Damping factor (ref. 8Ω, 1kHz)
Voltage gain
Signal/noise ratio, A-weighted
1
THD + Noise 3
SMPTE IM
4
IHF IM 5
Headphone output impedance

PHYSICAL SPECIFICATIONS

Dimensions (W x H x D)
6
Net weight
Shipping weight
1 From CD input to speakers output, volume setting for 500mV in, 8Ω 1W out
2 Minimum power per channel, 20Hz - 20kHz, both channels driven with no more than rated distortion.
3 Total harmonic distortion, 20Hz - 20kHz from 250mW to rated output
4 Intermodulation distortion, 60Hz - 7kHz, 4:1, from 250mW to rated output
5 CCIF IM distortion, 19 + 20kHz rated output
6 Gross dimensions include feet, volume knob and extended speaker terminals.
Specifications are subject to change without notice. For updated documentation and features please log onto www.nadelectronics.com for the latest
information about your C315BEE.
50kΩ + 100pF
200mV
7V
Tape Source Z + 600Ω
±5dB at 10kHz
±8dB at 100Hz
40W (16dBW)
0.02%
40W
8Ω 45W, +16.5dB
4Ω 60W, +17.8dB
8Ω 90W (19.5dBW)
4Ω 120W (20.8dBW)
>200
39dB
ref. 1W 95dB
<0.02%
<0.02%
<0.01%
68Ω
Net 435 x 70 x 242mm
Gross 435 x 80 x 292mm
5.25kg (11.5lb)
6.5kg (14.3lb)
SPECIFICATIONS