3.8 Submenus
There are a number of submenus under each option.
You can access all the functions to set the robotic
lawnmower settings via the submenus.
Certain submenus contain options that are ticked off to
the left. This means that these options are selected.
Check or uncheck the box by pressing OK.
3.9 Browse between menus
Browse through the main menu and submenus with the
help of the multichoice buttons (Automower 105) or the
arrow keys (Automower 310/315/315X/420/430X/
440/450X). Enter values and times using the number
keys and confirm each selection with the multi-choice
button marked OK. Press BACK to go up a step in the
menu or keep the HOME (Automower 105) alternatively
MENU (Automower 310/315/315X/420/430X/440/450X)
button pressed in for 2 seconds to go directly to the
main menu.
3.10 Main menu
Timer
The lawn should not be cut too often to
obtain the best mowing result.
Consequently, it is important to limit the
operating time using the timer function if
the working area is less than the robotic
lawnmower's working capacity. The timer
function is also an ideal tool to control
which periods the robotic lawnmower
should not mow, for example when
children are playing in the garden.
Cutting height
Applicable for Automower 420/430X/
440/450X
The cutting height can be varied from MIN
(1) to MAX (9). During the first week after
a new installation, the cutting height must
be set to MAX to avoid damaging the loop
wire. After this, the cutting height can be
lowered one step every week until the
desired cutting height has been reached.
Security
In this menu, settings relating to security
and the connection between the robotic
lawnmower and the charging station can
be made. There are 3 security levels to
choose from:
247 - 005 - 01.09.2017
Low , Medium , High .
Messages
Applicable for Automower 310/315/315X/
420/430X/440/450X
Historical fault and information messages
can be read in this menu. For some of the
most common fault messages, there are
tips and advice to help you rectify the
fault.
Weather timer
Applicable for Automower 315/315X/
420/430X/440/450X
This function allows the robotic
lawnmower to automatically adjust its
mowing times based on how much the
lawn grows. When the weather is good for
grass growth, the robotic lawnmower
mows more often and when grass growth
is slower the robotic lawnmower will
automatically spend less time on the lawn.
Installation
This menu function is used to customize
the installation. For many working areas
there is no need to alter the factory
settings, but depending on the lawn
complexity the mowing result can be
improved by making manual settings.
Settings
This selection allows you to make
changes to the general robotic lawnmower
settings such as date and time. You can
ECO mode and Spiral
also turn on/off
cutting , or save your settings in different
Profiles (Automower 315/315X/420/430X/
440/450X only).
Accessories
Applicable for Automower 310/315/315X/
420/430X/440/450X
This menu handles the settings for robotic
lawnmower accessories, for examples
Automower Connect or Automower
Connect@Home. Contact your local
Husqvarna representative for information
on what accessories are available for your
robotic lawnmower.
Installation - 13