Setting The Time; Language; Factory Settings; Software Update - Medion P85060 Bedienungsanleitung

NetRemote PIN-Setup
In this entry you can assign a new four-digit code which needs to be entered when
connecting using the Lifestream IR application on a smartphone or tablet PC.
Network profile
The device stores the last 4 WLAN networks to which it has been connected.
 Select a network and press OK. Confirm the subsequent query with YES to de-
lete the network from the list.
NOTICE!
The currently connected network cannot be deleted.
Keep the network connection on standby
 Select this menu item and set the function to YES if you want the Internet radio
to remain connected to the network even when in standby mode or when using
operating modes that do not require WLAN (AUX IN, FM radio, DAB radio). Other
media players can then access the Internet radio and wake it up.
 If the network connection is not to be maintained, set the function to NO. In
this setting, the WLAN function will also be switched off for operating modes
that do not use WLAN (AUX IN, FM radio, DAB radio). It will not be possible to
control the device using the Lifestream II app if this is the case.
NOTICE!
Please note that when a network connection is maintained in standby
(setting YES), the Internet radio will consume more power in standby
mode than indicated in the technical data.

17.3. Setting the time

Set the time and date here as described in the section 'Using the device for the first
time' .

17.4. Language

You can set the menu language here.

17.5. Factory settings

Select this entry and confirm the subsequent query with YES to reset the device to
the factory settings.
All existing network information will be deleted and will have to be re-entered to
establish a network connection.

17.6. Software Update

You can search for and install software updates using this function.
DE
EN
TR
85 of 144