Initial Operation - Kärcher A 2024 pt Bedienungsanleitung

Initial operation

Unpacking
Check the contents of the appliance for com-
pleteness when unpacking. You will find the
swivel casters in the container. The swivel
casters must be mounted on the appliance.
In the event of missing parts or any transport
damage, please contact your dealer.
Note: Please refer to page 2 for illustrations
of the appliance and the operation.
1 Carrying handle
2 ON/OFF switch
3 Suction connection
4 Swivel casters
5 Motor casing with clip closure
6 Storage compartment for suction tubes
and accessories
7 Mains cable compartment
8 Mains cable with plug
9 Socket
Delivered accessories
A Suction hose
B Suction tubes 2 x 0.5 m
C Floor nozzle with hard surface insert
D Adapter
E Crevice nozzle
F Filter bag
G Swivel casters (4x)
Attaching the Accessories
"
Remove the motor casing and take
accessories out of the container.
"
Fit the swivel casters on the contai-
ner bottom (4x). Insert paper filter bag if
necessary.
"
Put motor casing onto container and
lock it.
"
Connect accessories.
Operation
Caution:
Never operate the appliance without an in-
serted cartridge filter!
Dry wet filters completely before using them
for dry vacuuming!
"
Plug in mains cable / switch on ap-
pliance.
Dry vacuum cleaning
" Insert filter bag for dry vacuuming.
"
Use hard surface insert of the floor
nozzle for vacuuming on hard surfaces.
"
Work without the insert when vacu-
uming carpets.
Wet vacuum cleaning
Caution:
Do not use any paper filter bags!
Immediately switch the appliance off if foam
forms or liquids escape!!
"
Wet vacuum
Note: If the container is full, a float closes
the suction opening, and the appliance
works at a higher speed. Switch off the ap-
pliance immediately, and empty the contai-
ner.
Working with connected electric
Note: Electric tools with a maximum power
consumption of 2100 W (UK: maximum
1800 W) can be connected to the appliance
socket.
"
Plug the enclosed adapter onto the
suction hose and connect the electric
tool with the connection.
"
Plug the mains cable of the electric
tool in the appliance socket.
" Switch the appliance and electric tool on
for working.
tool
English
7