Safety Instructions; Start Up; Remove Transport Lock - Kärcher FP 306 Bedienungsanleitung

Spare parts
Use only original KÄRCHER spare parts.
You will find a list of spare parts at the end
of these operating instructions.

Safety instructions

This appliance is not intended for use
–
by persons with limited physical, sen-
soric or mental capacities or lack of ex-
perience and/or skills, unless such
persons are accompanied and super-
vised by a person in charge of their
safety or if they received precise in-
structions on the use of this appliance.
Children must only use this appliance if
–
they are older than 8 and if they are su-
pervised by a person responsible for
their safety or if they are instructed on
the use of the appliance by such per-
son.
In case of extended downtimes, switch
–
the appliance off at the main switch / ap-
pliance switch or remove the mains
plug.
The appliance must provide of a stable
–
ground.
The operator must use the appliance
–
properly. The person must consider the
local conditions and must pay attention
to third parties, in particular children,
when working with the appliance.
The operator must ensure that no ob-
–
jects that can be sucked in or thrown
away by the rotating disc are present in
the working area.
Electrical connection
The appliance may only be connected
–
to alternating current. The voltage must
correspond with the type plate on the
appliance.
10
Risk of electric shock
Never touch the mains plug and the
–
socket with wet hands.
Do not pull the plug from the socket by
–
pulling on the connecting cable.
Check the power cord with mains plug
–
for damage before every use. If the
power cord is damaged, please arrange
immediately for the exchange by an au-
thorized customer service or a skilled
electrician.
Protect the appliance against external
–
weather, humidity and heat sources.
Description of the Appliance
1 Polishing head
2 Foot switch for strut release
3 Strut
4 Power cord with plug
5 Storage, power cord
6 Handle
7 Suction hose
8 Cloth bag
9 Filter bag
10 Storage compartment for polishing
pads
11 Polishing pads
12 Pad holder
13 Suction hose connection
14 Transport rolls
15 Attachments for mains cable (4 ea.)
16 Transport lock

Remove transport lock

Illustration
 Remove the transport locks the first
time you use and before using the appli-
ance by pulling them off.
– 4
EN

Start up