Setting The Date; Stopwatch - Seiko V175 Bedienungsanleitung

SETTING THE DATE

l Before setting the date, be sure to set the main time.
Date
1. It is necessary to adjust the date at the end of February and 30-day months.
2. Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change properly.
14
CROWN
Unlock.
t
Pull out to the first click.
t
Turn clockwise until the desired date
appears.
t
Push back into the normal position.
t
Screw all the way in until it is locked.

STOPWATCH

l The stopwatch can measure up to 60 minutes in 1/5-second increments.
When the measurement reaches 60 minutes, the stopwatch automatically
stops.
l Split time measurement is available.
STOPWATCH 1/5-second hand
STOPWATCH minute hand
I Before using the stopwatch, be sure to check that the crown is set at the normal
position and that the STOPWATCH hands are reset to the "0" position.
• If the STOPWATCH hands do not return to the "0" position when the stopwatch is reset
to "0," follow the procedure in "SETTING THE TIME AND ADJUSTING THE STOPWATCH
HAND POSITION".
• While the second hand is moving at 2-second intervals, the stopwatch cannot be activated.
This is not a malfunction. See "ENERGY DEPLETION FOREWARNING FUNCTION" and "HOW
TO CHARGE AND START THE WATCH".
A
B
15