Real Time Clock Setup - Adam Equipment AZextra 3 Anleitung

EN

3.11 REAL TIME CLOCK SETUP

The Real Time Clock (RTC) is used only for the RS-232 output. The Date and
Time can be set as required. The scale will keep the clock running even when the
power is off.
Setting up the clock
• Press and hold the [CE] key when power is first turned on, release the key
when the revision is displayed. The displays show the current date and time
set.
" rtC
" "11,14,06" "16,41,35"
• Press the [CE] key to change the date and time. The display will show the
current time format, "H-m-S".
• Enter the time using the numeric keys using a 24 hour clock format, 3:41PM
is "154100".
• Press the [Tare] key to accept the time. The display will show the current
date format.
• Press the [Print] key to change the date format. Available formats are:
"Y-m-d" year, month, day
"m-d-Y" month, day, year
"d-m-Y" day, month, year
• Press the [Tare] key to accept the chosen format and then enter the date in
this format.
• Press the [Tare] key to accept the date.
An error code will be shown if the time (Err 1) or the date (Err 2) is not the
permissible values. For example, 34
© Adam Equipment Company 2011
th
day of a month is an invalid entry.
15