Webasto Telestart T80 Bedienungs- Und Wartungsanweisung Seite 15

Programming Telestart Transmitter
D
1. Place batteries into the battery compartment of the transmitter.
2. Remove fuse 1A (black) from the heater's fuse holder (voltage interruption).
3. Wait at least 5 seconds. GB
4. Replace fuse in heater's fuse holder and within 5 seconds press the OFF
button on the transmitter for at least 1 second.
5. "Learning" is completed.
A second or third hand-held transmitter can be programmed in the same manner.
NOTE:
The learning process can be repeated as often as necessary. The "oldest" transmitter
will be deleted each time.
OFF
max. 5 Sec. min. 1 Sec.
min. 5 Sec.
1A
1A
13