Extended Settings Of Kvm-Over-Ip Connection; Limiting The Bandwidth; Classifying Ip Packets (Diffserv) - G&D DP1.2-Vision-IP-Series Installation Und Bedienung

Extended settings of KVM-over-IP connection

Limiting the bandwidth

By default, the KVM extender uses the maximum available bandwidth of a Gigabit
Ethernet. By means of manual bandwidth management you can adapt the transmis-
sion to different bandwidth requirements.
How to set a limit for the bandwidth of a KVM-over-IP connection:
1. Use the remote hotkey Ctrl+
2. Select the row
KVM connection
3. Under Bandwidth limit (Mb/s)
connection in Mb/s.
NOTE: Entering the value
4. Press to save your settings.
F2

Classifying IP packets (DiffServ)

For QoS purposes (Quality of Service) you have the possibility to use
Services Codepoints (DSCP) to classify the IP packets.
Through this classification, you can prioritize the data packets, for example,
through a switch.
You can define a DSCP for the IP packets of the keyboard, mouse and control data
( Communication data packets), as well as the IP packets of the video, audio and RS232
data ( data packets).
Data
How to configure the DSCPs of the IP data packets:
1. Use the remote hotkey Ctrl+
2. Select the row KVM connection
3. Enter the following data under
DiffServ Communication:
DiffServ Data:
4. Press F2 to save your settings.
Establishing a KVM-over-IP™ connection for the first time
Num to open the OSD of the computer module.
and press .
Enter
you can set the bandwidth limit of a KVM-over-IP
deactivates the limit.
0
to open the OSD of the computer module.
Num
and press Enter .
Network control :
Define the Differentiated Services Codepoint
used for the classification of the IP packets of the
data packets.
munication
Define the Differentiated Services Codepoint
used for the classification of the IP packets of the
data packets.
Differentiated
(DSCP) to be
(DSCP) to be
G&D DP1.2-Vision-IP-Fiber · 20
Com-
Data