TOP PANEL FEATURES
1.
DOCK – Connect your iPod here.
Gently rock the iPod back and
forth over the connector when
attaching or removing it.
2.
DOCK ADJUSTER – Turn this
knob accordingly so your docked
iPod rests against the support.
3.
INPUT SELECTOR – Selects the
input source to be routed to the
corresponding
channel.
jacks are located on the rear
panel.
4.
CHANNEL LEVEL INDICATOR –
Displays the audio level of the
corresponding channel.
5.
CHANNEL GAIN – Adjusts the
channel's pre-fader and pre-EQ
gain level.
6.
CHANNEL TREBLE – Adjusts the
high (treble) frequencies of the
corresponding channel.
7.
CHANNEL MID – Adjusts the mid-
range
frequencies
corresponding channel.
8.
CHANNEL BASS – Adjusts the
low (bass) frequencies of the
corresponding channel.
9.
CHANNEL FADER – Adjusts the
audio level on the corresponding
channel.
10.
CHANNEL CUE – Sends pre-fader audio to the Cue Channel for headphone monitoring.
11.
CUE MIX / SPLIT – When this switch is in the SPLIT position, the headphone audio will be "split" such that all
channels sent to CUE are mixed to mono and applied to the left headphone channel and the Program mix is
mixed to mono and applied to the right channel. When the switch is in the MIX position, Cue and Program
audio will be "blended" together.
12.
CUE MIX – Turn to mix between Cue and Program in the Headphone channel. When all the way to the left,
only channels routed to CUE will be heard. When all the way right, only the Program mix will be heard.
13.
CUE GAIN – Adjusts the audio level of the Cue channel.
14.
MIC 1 INPUT – Connect a microphone to this input with an XLR cable.
15.
MIC GAIN – Adjusts the audio level of the microphone signal.
16.
MIC TREBLE – Adjusts the high (treble) frequencies of the microphone channel.
Tip: If you experience feedback when using a microphone at loud levels, try turning down the high frequencies.
17.
MIC BASS – Adjusts the low (bass) frequencies of the microphone channel.
18.
MIC ON / OFF – Turns the microphone input on or off. "TALKOVER" reduces the combined levels of Channels
1-4 to -12dB (an appropriate "talkover" level).
19.
MASTER FADER – Adjusts the output volume of the Program mix.
20.
STEREO LEVEL INDICATOR – Displays the audio level of the Program mix.
21.
MONO / STEREO – Adjusts the Program mix for stereo or mono operation.
22.
BALANCE – Adjusts the balance of right to left audio in all outputs (MASTER, RECORD, and ZONE
OUTPUTS).
23.
BOOTH VOLUME – Adjusts the Booth output level.
24.
CROSSFADER – Blends audio between the channels assigned to the left and right side of the crossfader.
25.
CF ASSIGN – Selects which input channel will be heard when the crossfader is moved towards this knob. All
channels not assigned will remain active.
26.
CF SLOPE – Adjusts the slope of the crossfader curve. Flip switch to the left for a smooth fade (mixing) or to
the right for a sharp cut (scratching).
27.
BEATKEEPER BPM DISPLAY – iM9's built-in BeatKeeper™ technology will automatically detect the tempo (in
BPM – "beats per minute") of the song playing on that side of the CROSSFADER and show it in this display.
14
4
15
16
Input
17
18
13
12
11
of
the
25
41
3
3
3
5
4
5
4
5
6
6
6
7
7
7
8
8
8
10
10
10
9
9
9
27
30
29
28
24
5
3
4
5
20
6
7
23
8
22
10
21
9
19
27
25
29
26
28
2
1
40
3839
37
36
35
34
33
32
31