Hitachi KPI-502E1E Installations- Und Betriebshandbuch Seite 18

INSTALLATION AND OPERATION MANUAL
18
8. CHECKING PRODUCT RECEIVED
Upon receiving this product, inspect it for any shipping damage.
−
Claims for damage, either apparent or concealed, should be field
immediately with the shipping company.
Check the model number, electrical characteristics (power supply,
−
voltage and frequency) and accessories to determine if they are
correct.
The standard utilisation of the unit shall be explained in these
−
instructions.
9. SAFETY SUMMARY

WARNING
Do not perform installation work and electrical wiring connection
−
without referring to the Part II Installation of this Installation and
Operation Manual.
Check that the ground wire is securely connected.
−
Connect a fuse of specified capacity.
−
PART II- INSTALLATION
Therefore, the utilisation of the unit other than those indicated in
−
these instructions is not recommended.
Please contact your local agent, as the occasion arises.
−
HITACHI's liability shall not cover defects arising from the alteration
−
performed by a customer without HITACHI'S consent in a written
form.

CAUTION
Do not install the unit, remote control switch and cable within
approximately 3 meters from strong electromagnetic wave
radiators such as medical equipment.