Operating Distance Of The Controller; Power-Saving Features Of The Controller - Sony VGP-BRMP10 Bedienungsanleitung

11
Disconnecting
Set the power switch on the controller to OFF.
Reconnecting
Turn on the power of the controller. After the Bluetooth status lamp turns
blue and begins flashing, the flashing will slow down, and the connection
will be resumed.
Note
Depending on usage conditions of your personal computer, the Found New Hardware
wizard screen may appear when starting or restarting your personal computer. In such a
case, follow the wizard's instructions to install the software.

Operating distance of the controller

The controller can normally be operated within about a 32 ft. (10 m) radius
around the personal computer. Depending on the usage environment,
sometimes the usable distance may be notably shorter, preventing normal
operation.
In such a case, take the following measures:
• Use the controller as far away from other wireless devices as possible.
• Use the controller closer to the personal computer.

Power-saving features of the controller

When the controller is connected to a personal computer, if you do not
operate the controller for 20 minutes, it will disconnect from the personal
computer in order to avoid draining the battery. The controller will
reconnect automatically when you operate the controller's touchpad or
buttons.
GB
12
Click "Finish".
Try operating on the touchpad of the controller. If the pointer displayed on
your screen moves in the same direction, the connection is complete.
z Hint
When the connection is complete, the Bluetooth status lamp turns blue and flashes
slowly.