Wall Mounting; Waste Electrical Recycling; Correct Disposal Of Product - Seg TOLEDO 23.6-inch LCD-TV Bedienungsanleitung

Remote contr
Type
Control distance
Control angle
Batteries
Dimensions
Weight

Wall Mounting

1. The stand mus rst be removed. Place the TV face
down.
2. Remove the one screws at the bottom underneath
the stand. Press the retaining clips forward to release
the base of the stand. Remove the two screw inside of
the trunk of the stand still attached to the TV. Remove
the four screws on the back of the TV to release the
remaining part of the stand.
3. Remove and store the stand and screws.
4. Use four machine screws to mount the TV on the
bracket.
This unit is VESA-Compliant and designed to be wall
mounted with a VESA-Compliant 200mm x 100 mm
mounting kit. Mount this unit according to the instruc-
tions of the wall bracket (not supplied)
200mm
4 Mounting holes Screw size MB4 x 10
28
cations
Infrared
5m
30 degrees (Horizontal)
2 x 1.5V, Size AA
60 x 204 x 32mm
140g (without batteries)
100mm
TOLEDO 23.6-inch LCD-TV

Waste Electrical Recycling

Correct disposal of Product

This sign indicates that this product may not
be disposed of with your regular household
waste. The recycling and separate collection
of such products is your responsibility. Please
drop off the above mentioned waste at a
designated place for recycling waste electri-
cal and electronic equipment. If you do not know where
to drop off your waste equipment for recycling, please
contact your loc ce or household waste collec-
tion service.
The crossed out wheeled dust bin symbol
indicates that batteries and /or accumulators
must be collected and disposed of separately
from household waste.
If the battery or accumulator contains more
(Hg), and/or c
tery Directive (2006/66/EC), then the chemicals
Hg Cd Pb symbols for lead(Pb), mercury (Hg)
and/or cadmium (Cd) will appear below the
crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you
will help to assure the proper disposal of products and
batteries thus help to prevent potential negative conse-
quences for the environment and human health.
For more detailed information about the collection and
recycling programmes available in your country, please
contact your loc ce or the shop where you pur-
chased this product.
This appliance complies with European Safety
and Electrical directives.
following EU regulations:
En55013:2001+A1:2003+A2:2006
EN55020: 2007
EN61000-3-2: 2006 EN61000-3-3:1995+A1:2001+A2:2005
EN55022:2006(CLASS-A)
EN55024:1998+A1:2001+A2:2003
Manufacturer:
Schmid Electronics GmbH
In Dürrfeldslach 3
D-66780 Rehlingen-Siersburg (Germany)
Fon: +49(0)6835 92350-0
Fax: +49(0)6835 92350-500
values of lead (Pb), mercury
-