Filter Care - Bosch BSR1 Serie Gebrauchsanleitung

Cleaning and care
a
44
2
1
b
a
45
b
Putting the filter unit with dust box back in
44
Fig.
a) Place the dust box on the filter unit and turn it clock-
wise to lock it.
The filter unit with dust box can only be inserted with
the handle up.
b) Place the filter unit with dust box fully in the robot
vacuum.
Move the filter unit handle down and lock it in the
robot vacuum.
Note
If the filter unit is not placed and locked in the robot
vacuum, the "Insert dust box" error indicator will light
up and the robot vacuum will not start.
!
Caution
The filter unit must only be placed in the robot vacu-
um together with the dust box.

Filter care

Cleaning the cartridge filter
45
Fig.
The filtering action of this filter will remain high, even if
the surface of the filter becomes discoloured.
Take the filter unit with dust box out of the robot vacu-
41
um. Fig.
Take the dust box out of the filter unit. Fig.
Remove the lint filter from the filter unit. Fig.
a) It is usually sufficient to lightly shake or tap out the
cartridge filter in order to dislodge any particles of
dirt.
b) If this is not sufficient, carefully vacuum the cartridge
filter with a vacuum cleaner on a low power setting.
en
42
43
105