Global Menu Page 5 - Global And Audio Settings Dump; Global Menu Page 6 - Calibration; Global Menu Page 7 - Os Transmit - Novation UltraNova Benutzerhandbuch

RE2: Bank Select
Displayed as:
Bank
Default value: (currently selected)
Range of adjustment: A to D
This allows you to select the Bank of Patches to dump. It will initially display the Bank of the
currently-selected Patch. If this is not the one you want, select another.
RE3: Patch Select
Displayed as:
Patch
Default value: (currently selected)
Range of adjustment: 1 to 127
This will display the number of the currently-selected Patch. If this is not one of the
Patch(es) you want to dump, you can select another.
RE4: Not used.
RE5: The encoder is not used.
Display shows:
Current
Press the button below RE5 if you want to dump only the current Patch. This will include
any parameter changes which have been made, but not saved.
RE6: The encoder is not used.
Display shows:
OnePatch
Press the button below RE6 if you want to dump the current Patch in its original form (as
last saved). In this case, any alterations which have been made to it will not be included.
COMPRES1 C1Ratio C1Thrsh C1Attack
2.0 -20
RE7: The encoder is not used.
Display shows:
Dst1Type Dst1Comp OneBank Dst1Lvl
Diode 100
Press the button below RE7 if you want to dump all 127 Patches in the currently-selected
Bank.
Rvb1Type Rvb1Dec
LrgHall 90
RE8: The encoder is not used.
Protect Local MidiChan MidiOut
Display shows:
Off On 1
Press the button below RE8 if you want to dump all the Patches currently in the UltraNova.
TuneCent Transpse KbdVel VelResp
0 0 Curve 4 Medium
Global Menu Page 5 – Global and Audio settings dump
ClockSource Clock} 120 BPM
Auto Status} Internal Clock
In addition to saving Patch data via a dump to a computer, it is also possible to dump the
current settings of the Global and Audio Menus.
DUMP to Bank Patch
USBport A 0 Init Program
DUMP to ^^
USBport GLOBALS & AUDIO
Calibrate BendWhl ModWhl
RE1: Dump Port Select
Current O/S Version 1.0.00
Current O/S Transmit ^^
Displayed as:
DUMP to
Startup O/S Version 1.0.00
Default value: USBport
Range of adjustment: USBport or MIDIout
In12Link In1Gain In2Gain In1 -60 |--------|
Indept Off Off In2 -60 |--------|
This control selects which external data port is to be used for the dump.
HeadPhones Level Control
Follow master volume (1+2 only)
RE2: Not used.
OUTPUTS Synth Input1 Input2
1+2 127 0
RE3: The encoder is not used.
OUTPUTS Synth Input1 Input2
Display shows:
Globals & Audio
3+4 0 127
Press the button below RE3 if you want to dump the current settings of the Global and
SPDIF
COMPRES1 C1Ratio C1Thrsh C1Attack
Audio Menus.
Off
2.0 -20
RE4 to RE8: Not used.
Dst1Type Dst1Comp Dst1Lvl
Novation UltraNova
Diode 100
Global Menu Page 6 – Calibration
Rvb1Type Rvb1Dec
The UltraNova's controllers should all operate correctly out of the box, however on occa- LrgHall 90
sion it may be necessary to calibrate them to ensure they operate as intended. In particular,
Protect Local MidiChan MidiOut
this procedure is recommended following an OS update. The controllers that can be cali-
Off On 1
brated are: the pitch wheel (PITCH), the Mod wheel (MOD) and Aftertouch. To calibrate a
TuneCent Transpse KbdVel VelResp
controller you need to move it to its extremes, e.g., turn the Pitch wheel downwards as far
0 0 Curve 4 Medium
as it can go (you will notice that the BendWhl value on the display will show zero). Then
ClockSource Clock} 120 BPM
rotate the Pitch wheel to its opposite extent (the BendWhl value will show 255). With
Auto Status} Internal Clock
the Pitch wheel in its central position, it should return a BendWhl value of approximately
DUMP to Bank Patch
128. The Pitch wheel is now calibrated, and the procedure for calibrating the Mod wheel is USBport A 0 Init Program
identical (use the ModWhl parameter).
DUMP to ^^
USBport GLOBALS & AUDIO
Calibrate BendWhl ModWhl
Current O/S Transmit ^^ Current O/S Version 1.0.00
Startup O/S Version 1.0.00
In12Link In1Gain In2Gain In1 -60 |--------|
Indept Off Off In2 -60 |--------|
HeadPhones Level Control
C1Rel C1Hold C1Gain
0 64 32 127
0
Touch/Filter
AllBanks
Off Set by Patch
DfltRate FootSwth Whlights
48KHz Auto On
Name Current OnePatch OneBank
Aftouch SetAftouch
0dB In1FX
0dB 0
Level Balance
127 0
RECORD Mode
0 Synth
Level Balance (Host3+4/Synth+Inps)
0 127 0
C1Rel C1Hold C1Gain
0 64 32 127
0
Touch/Filter
Off Set by Patch
DfltRate FootSwth Whlights
48KHz Auto On
Name Current OnePatch OneBank
Aftouch SetAftouch
0dB In1FX
0dB 0
Level Balance
To calibrate Aftertouch, lightly press a key, and observe the Aftouch parameter value of
zero; then press the key hard, and observe the value of 127. Aftertouch is now calibrated.
Correctly calibrated controllers should return the following values:
Pitch –
Mod –
Aftertouch –
FX - COMPRESS 1/2 COMPRES1 C1Ratio
2.0
After performing the above procedure, press WRITE [23] to store the revised calibration.
FX - DISTORT 1/2 D ISTORT1 Dst1Type
Diode
RE1-5: Not used, but note that the Aftertouch value (see below) is displayed below RE5.
FX - REVERB 1/2REVERB1 Rvb1Type
RE6: SetAftouch
LrgHall
SetAftouch sets Aftertouch sensitivity. With a value set to 127 you will ind that only a very
GLOBAL Protect Local
slight difference in key pressure is required to return a control value of zero and one of 127,
Off On
displayed as the Aftouch value. With lower values of SetAftouch, the pressure difference
TuneCent Transpse
is more marked. In general, keeping SetAftouch set to a mid-range value will give the best
0 0
results.
ClockSource
Auto
RE7-8: Not used.
DUMP to Bank
USBport A
Global Menu Page 7 – OS Transmit
DUMP to
USBport
If you want to make a backup copy of the UltraNova's operating system, it is possible to Calibrate
Current O/S Transmit
perform a SysEx dump of the data to your computer from this page.
AUDIO In12Link In1Gain
Indept Off
To transmit the OS, press the lashing button under RE3.
HeadPhones Level Control
Follow master volume (1+2 only)
OUTPUTS Synth
1+2 127
OUTPUTS Synth
3+4 0
SPDIF
Off
AllBanks
In2FX
0
1+2/3+4
AllBanks
In2FX
0
1+2/3+4
Min. (0); Centre (128); Max. (255)
Min. (0); Max. (127)
Min. (0); Max. (127)
C1Thrsh C1Attack C1Rel C1Hold
-20 0 64
Dst1Comp Dst1Lvl
100 0
Rvb1Dec
90
MidiChan MidiOut Touch/Filter
1 Off Set by Patch
KbdVel VelResp DfltRate FootSwth
Curve 4 Medium 48KHz Auto
Clock} 120 BPM
Status} Internal Clock
Patch Name Current OnePatch
0 Init Program
^^
GLOBALS & AUDIO
BendWhl ModWhl Aftouch SetAftouch
^^ Current O/S Version 1.0.00
Startup O/S Version 1.0.00
In2Gain In1 -60 |--------|
Off In2 -60 |--------|
Level
Input1 Input2
0 0
Input1 Input2 Level Balance (Host3+4/Synth+Inps)
127 0 127
Novation UltraNova
C1Gain
32 127
Whlights
On
OneBank AllBanks
0dB In1FX In2FX
0dB 0 0
Balance 1+2/3+4
127 0
RECORD Mode
Synth
0
39